Data Loggers and Data Acquisition Systems For All Applications - Temperature data loggers, Voltage and Current data loggers, Humidity data loggers, Power and energy data loggers and more
Data Loggers for All Applications


   1 -800 - 956 - 4437

Data Logging GuidesApplications -> Automotive

Automotive

Automotive

Automotive applications cover a broad range of projects including performance validation, engine manufacturing, fuel efficiency testing, emissions testing, fleet management, and many more. CAS Datalogger provides highly-accurate, sophisticated dataloggers and data acquisition devices for all these projects, no matter how demanding.

View products for Emissions Testing, Performance Verification and More

Displaying Page 1 of 2



Test and Monitoring for Automatic Car Seats

Test and Monitoring for Automatic Car Seats

Published on March 26, 2014

Manufacturer: dataTaker
Measurements: Current, Other

In late 2013 CAS DataLoggers provided the dataTaker automation solution for a car seat manufacturer required to monitor and test their products during the manufacturing process. The manufacturer’s representative contacted CAS DataLoggers looking for an automated testing solution to process each seat and produce a printed report of the test results.




Ensuring RICE NESHAP Compliance in an Auto Factory

Ensuring RICE NESHAP Compliance in an Auto Factory

Published on March 13, 2013

Manufacturer: dataTaker
Measurements: Pressure, RPM, Speed, Temperature, CAN/OBD

CAS DataLoggers provided the equipment monitoring system for an automotive manufacturer who needed to ensure compliance with RICE NESHAP, the EPA emissions regulation mandating that diesel engines reduce air pollutant emissions from many categories of new and existing engines. Following installation of each device, the engines had to be monitored for operating temperature, RPM, pressure and additional parameters for full compliance.




Validating Brake Performance on a Prototype Passenger Car

Validating Brake Performance on a Prototype Passenger Car

Published on December 5, 2012

Manufacturer: ADwin
Measurements: Speed, Temperature

CAS DataLoggers recently supplied an advanced DAQ system for an automotive manufacturer who needed to evaluate the reliability of a prototype vehicle’s braking system. The front disk pad temperatures, MPH, average deceleration and braking duration all needed to be recorded immediately before the brakes were applied. Therefore the customer needed a data acquisition device which could quickly ‘drill down’ on the braking event’s data and store the data on external RAM, and which...




Vehicle Data Acquisition For Component Reliability Testing

Vehicle Data Acquisition For Component Reliability Testing

Published on December 12, 2011

Manufacturer: dataTaker
Measurements: Speed, Temperature, Voltage

A large manufacturer of OEM automotive components needed to conduct an ambitious field test to evaluate the reliability of its latest device. This test involved data collection from multiple vehicles at various locations across the US to study the effects of various environmental conditions on the component. The test needed to run for up to 3 years to capture enough data for accurate statistical evaluation and lifetime predictions, requiring more than 20 measurements inc...




Testing Fuel Consumption in a Gold Mine

Testing Fuel Consumption in a Gold Mine

Published on November 28, 2011

Manufacturer: dataTaker
Measurements: Flow, Pulse, Temperature, RPM

CAS DataLoggers recently provided the datalogging solution for FPC International, a company specializing in a fuel additive widely used in tankers, trucks, and trains all over the world to save on fuel and engine maintenance costs while reducing carbon footprints and emissions. Rather than just making claims of their product’s benefits, FPC Intl. actively tested and documented its results, making all of their testing available online for customer review. The company\\\'s curren...




Performance Validation of Test Cars

Performance Validation of Test Cars

Published on October 18, 2011

Manufacturer: Grant Instruments
Measurements: Pressure, Temperature

CAS DataLoggers recently provided a major automobile manufacturer with the data logging solution for its rigorous performance validation testing. As part of the testing of any new vehicle, sample units were typically subject to a variety of endurance and durability tests to identify any potential weak points or failure modes and chart their performance. To gather the most detailed record of a car’s data throughout these speed validation tests and ensure the safety and robustn...




Underhood Thermal Management and Engine Cooling Analysis

Underhood Thermal Management and Engine Cooling Analysis

Published on September 13, 2011

Manufacturer: Delphin Technology
Measurements: Temperature

Malaysian automobile manufacturer Proton needed to test the underhood thermal management and engine cooling performance in their new manual 5-speed Proton Persona 1.6 M/T Line test car. The thermal test program was designed to check underhood part performance in order to ensure that the parts were working within design requirements after being exposed to high temperatures during driving and climbing. Engine cooling analysis testing was performed to verify cooling performance ...




Calibrating Emissions Dynamometer Equipment

Calibrating Emissions Dynamometer Equipment

Published on August 31, 2011

Manufacturer: Influx Technology
Measurements: CAN/OBD

CAS DataLoggers recently provided the data logging solution for a large and well-known original equipment manufacturer using a standard production diesel vehicle to calibrate the emissions dynamometer equipment at their plant. The test vehicle was locked in place with its wheels parked on pairs of large metal rollers. Using weights along with electronic coordination, these rollers matched the test car’s inertia and driving resistance. The vehicle was driven over a preset spee...




Displaying Page 1 of 2
1
2 Next

Request More Information

If you need information right away or prefer to speak with a person, call us and one of our Experienced Applications Engineers will be happy to talk with you. You can reach us at 1-800-956-4437 during our normal business hours Monday - Thursday from 8am to 5:30pm and Friday from 8am to 4:30pm (EST).

After filling out the form below, an applications engineer will contact you within at least one business day. Fields that are not required are recommended to be filled out so that we can better assist you.

Request Form

Submit the product or application you are interested in and we'll contact you. Need immediate information? Give us a call at 800-956-4437.

Name (required):
Email (required):
Company:
Phone #:
City:
State:
Country:
Product(s) of Interest:
Application:
Additional Information:
Human Verification What is the next number after 2?  

**Your contact information allows us to provide you with pricing information. We never sell or distribute your information. See our Policies page for more information.


Follow CAS Dataloggers on Facebook Follow us on LinkedIn Follow us on Twitter Find us on Google+ Find us on Youtube
Home | About CAS | Policies | Distributor Login | Systems Integrators | Sitemap

©2014 Computer Aided Solutions, LLC.