rtr-500bm

TandD RTR-500BM

  • Data Monitoring and Access via Mobile (4G) Network
  • Wireless Data Collection from Data Loggers (Remote Units) to RTR-500BM (Base Unit)
  • On-Site Warnings & Alert Notifications to Mobile Devices
  • GPS Function for Location Info
  • Data Access and Monitoring from Smart Phone / Tablet Browser
  • WebStorage Service available
  • A 9.5% Tariff Surcharge will be added to this item at checkout

$679.00

Normal delivery 1-2 weeks

Get a QuoteGet More Info
SKU: RTR-500BM Categories: , , , , , , , ,

Description

The T&D RTR-500BM is a data collector equipped with 4G mobile network capability. It collects data from nearby data loggers via wireless radio communication and then automatically sends it via 4G cell phone networking* to the free cloud storage service “T&D WebStorage Service” for anytime, anywhere access. It is perfect for situations where you have no PC or LAN available, such as during transportation, in greenhouses, or at construction sites. As long as you can supply power, you can collect and transfer data without worry and stress.

The RTR-500BM can be combined with any of the RTR-500/RTR500B series data loggers and up to 20 loggers can be registered for simultaneous use. PC software “RTR500BM for Windows” or the mobile app “T&D 500B Utility” can be used to set up mobile communication settings. Because the data collector uses mobile networking to transfer data, all you need to do is secure a power source and be in mobile range to send data to TandD’s cloud-based WebStorage Service, which makes it easy to check data, display graphs, and check warnings from your PC, smartphone or tablet anytime, anywhere.

The RTR-500BM has a warning monitoring function that sends a warning e-mail via the T&D WebStorage Service and/or SMS when a set limit is exceeded. Also, by connecting a buzzer or lamp to the contact output, you can set up an on-site alarm.

*To use an RTR-500BM, a SIM card from a carrier or mobile network service must be purchased.

The RTR-500BM replaces the RTR-500MBS-A model.

Specifications

Compatible Devices Remote Units: RTR501B / 502B / 503B / 505B / 507B
RTR-501 / 502 / 503 / 507S / 574 / 576 / 505-TC / 505-Pt / 505-V / 505-mA / 505-P (*1)
(Including L Type and S Type)
Repeaters: RTR500BC,
RTR-500 (*1)
Maximum Number of Registrations Remote Units: 20 units
Repeaters: 5 units x 4 groups
Communication Interfaces Short Range Wireless Communication Frequency Range: 902 to 928MHz RF Power: 7mW Transmission Range: About 150 meters (500 ft) if unobstructed and direct Frequency Range: 869.7 to 870MHz RF Power: 5mW Transmission Range: About 150 meters if unobstructed and direct LTE Communication LTE-FDD: B2/B4/B12 WCDMA: B2/B5 LTE-FDD: B1/B3/B5/B7/B8/B20 LTE-TDD: B38/B40/B41 WCDMA: B1/B5/B8 GSM: 900/1800MHz Bluetooth 4.2 (Bluetooth Low Energy) For Settings USB 2.0 (Mini-B connector) For Settings Optical Communication (proprietary protocol)
Communication Time Data Download Time from Remote Unit (for 16,000 readings)
Via wireless communication: About 2 min.
An additional 30 seconds should be added for each Repeater. (*2)
Does not include communication time from Base Unit to server over LTE.
External Alarm Input/Output
Terminal (*3)		 Input Terminal: Contact Input
Internal Pull-up: 3V 100kΩ
Maximum Input Voltage: 30V
Output Terminal: Photo Mos Relay Output
OFF-State Voltage: AC/DC 50V or less
ON-State Current: 0.1 A or less
ON-State Resistance: 35Ω
Communications Protocol
(*4)		 HTTP, HTTPS, FTP, SNTP
Power AC Adaptor (AD-05A3 or AD-05C1)
External Battery Connection Adaptor BC-0204 (DC 9-38V)
AA Alkaline Battery LR6 x 4
Battery Life (*5) Expected battery life with only AA alkaline batteries:
Approx. 3 days under the following conditions (only one Remote Unit and no Repeaters, downloading data once
a day, sending current readings at 10-min interval)
Dimensions H 96 mm x W 66 mm x D 38.6 mm (excluding antenna)
Antenna Length (Cellular/Local): 135 mm
Weight Approx. 135 g
Operating Environment Temperature: -10 to 60 °C
Humidity: 90 %RH or less (without condensation)
Accessories AA Alkaline Battery LR6 x 4, Antenna CSR-0011 x 2 (Cellular/Local), USB Mini-B Cable US-15C, AC Adaptor AD-05A3
or AD-05C1, Registration Code Label, Manual Set (Warranty Included)
GPS Interface (*6) Connector: SMA Female Jack
Power Supply: 3.3V
SIM Card nano SIM Card (*7)
  1. RTR-500 Series loggers and Repeaters do not have Bluetooth
    capability.
  2. When using RTR500BC as Repeater. Depending upon conditions
    it may take up to an additional 2 minutes.
  3. In order to use the external terminal, please purchase the optional alarm connection cable (AC0101).
  4. Client Function
  5. Battery life depends on several factors, including number of warning reports sent, ambient temperature, radio environment, frequency of communication,and quality of the battery being used. All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual batterylife.
  6. In order to use the GPS function (to attach geographical positioning info to current readings data), please purchase a compatible GPS antenna (SMA Male
    Plug)
  7. Please prepare a contracted SIM card (with a minimum speed of 200Kbps) separately.The specifications listed above are subject to change without notice.

WebStorage Service

Free Online Service for Cloud Data Storage

It’s never been so easy to share your recorded data via the Internet! T&D’s free WebStorage Service is perfect for processing and managing data recorded in remote places or for allowing several people to view the same recorded data at their convenience. Users can check the current conditions of data loggers such as battery level and radio signal strength between the Base Unit and Remote Unit. Recorded data can be transmitted to the WebStorage Service from any compatible Tamp;&D product. Data storage capacity is 20MB.

Additionally, the data transmitted to T&D WebStorage Service can be accessed via your browser from anywhere, anytime, as long as an internet connection is available. Mobile device apps are also available for devices running iOS and Android.

Compatible Products

Users can setup automatic data transmission from the following T&D products to the WebStorage Service:

Accessories

Reviews

There are no reviews yet.

Be the first to review “TandD RTR-500BM”