|
|
The new EL-USB-5 captures event or state changes or provides pulse counting in a low cost data logger with a built in USB interface for set-up and data download. The EL-USB-5 is battery powered and can store up to 32,000 events or state changes in its own memory. It can capture events, either rising or falling edge, which occur as fast as 5 times per second or state changes twice a second. When used in pulse counting mode, it can capture pulses occurring at up to 100 Hz during one of 8 user programmable logging intervals.
 EL-USB-5 The EL-USB-5 can accept input voltages of up to 24VDC allowing use with many common types of systems including PLC’s and PAC’s. It also has a mode where it can be used with a voltage free, dry contact such as a magnetic reed switch, relay or microswitch. LED’s on the data logger provide a quick indication of the logging state. A built in USB interface makes it easy to download data to a PC.
The data logger is supplied with EL-USB-WIN software, a very easy to use Windows based application that can be used to configure the recording parameters and download stored data. EL-USB-WIN is compatible with Windows 2000/XP/Vista and Windows 7 including 32 and 64 bit versions. The EL-USB-5 also comes with a set of clip leads for attachment to the signals source and a replaceable lithium battery that provides up to 1 year of operation.
The EL-USB-5 is ideal for capturing events such as door open/closing, equipment up/down time or counting machine cycles. For more information click here for the EL-USB-5 Data Sheet, or call us at (800) 956-4437. For more information on all of the data logging products we offer, visit our web site, www.DataLoggerInc.com .
CAS Dataloggers has a great selection of equipment data loggers to monitor and record 4-20 mA process current signals provided by many common types of sensors and transducers. Data from current loops, widely used in applications where long cable runs and noise are concerns, can easily be captured for record keeping, alarming or diagnostics.
 Milliamper Data Logger With a wide selection, we can provide the exact product to fit your needs depending on the number of channels required, sample rate, data storage required and other requirements of the application. A sampling of our products includes:
- MilliAmper – Single channel, battery powered for remote applications with a removable memory card
- Accsense A1-10 Pod – Wireless monitoring with automatic upload and a web interface
- Grant Squirrel SQ20xx – Portable battery operated loggers ideal for temporary collection and trouble shooting
- Datataker DT8x – Rugged, industrial data loggers with flexible inputs, alarms and triggering
- Delphin – High speed data loggers for capturing transient events.
For more information, visit our DC Current Data Logger Page or call us at 800 956-4437 to discuss your needs with one of our sales engineers. We can also help you find sensors for pressure, flow, temperature or other parameters to go along with the data logger. Visit our web site CAS Dataloggers for a complete selection of data logging and recording equipment
Just in from the printer, the new CAS Dataloggers catalog features the latest data logging systems from leading manufacturers. The selection of data loggers includes models with 2 to more than 100 inputs that can measure temperature, humidity, voltage, current and many other parameters. They are suitable for a wide range of applications in manufacturing, research, healthcare, and environmental monitoring.
 CAS Dataloggers Catalog Products featured in the new catalog include:
- Accsense – Wireless and LAN based sensor pods with on-line monitoring
- dataTaker – Multi-function, universal input data loggers with a web interface
- Grant Instruments – High accuracy portable data loggers
- Ibexis – Remote monitoring with integrated cellular modem
The selection of data loggers featured in the catalog are satisfy many different kinds of needs such as general purpose data loggers that can simultaneous acquire analog, digital, serial and Modbus data, geotechnical data loggers for monitoring bridges, dams and tunnels, temperature monitoring systems for furnaces, ovens, refrigerators, freezers and cryostats with sophisticated alarming capabilities, battery operated portable models that can be used for troubleshooting intermittent faults and monitoring systems that can collect and automatically transmit data from remote sites.
To get your copy, please click here for the On-line Request Form or call us at 800-956-4437. For a great selection of all types of data loggers from more than a dozen manufacturers, visit our web site, www.dataloggerinc.com.
To accommodate our growth, CAS Dataloggers has relocated our offices to:
12628 Chillicothe Rd.
Unit J
Chesterland, OH 44026
 New CAS Dataloggers Offices Click here for: Google Map of our new location
This new space will allow us to serve you better with:
- Expanded product inventory
- A new phone system with direct dial lines
- Larger training area
- A drive up window!
Our new offices also provide room for us to add staff in the future as we take on new product lines.
 GD47 Air Quality Transmitter The Eltek GD47 is a self contained transmitter for air quality measurements. It collects temperature, humidity and CO2 measurements and sends them wirelessly to a receiver for storage, display and alarming. The GD47 has an LCD to provide local real-time display of measured values. It uses a self calibration NDIR (infrared) sensor for accurate CO2 measurements in the range of 0-5000 ppm. The GD47 is powered by an external 12V supply with an internal NiMH back-up battery that can provide up to 100 hours of operation. The GD47 is one of more than two dozen models of transmitters with versions for temperature, humidity, voltage, current, state/pulse, light and air pressure.
Measured data is transmitted via a proprietary wireless link to one of several receivers:
- RX250AL – Wireless receiver with local storage for up to 250,000 readings and alarm output
- RC250 – Wireless receiver with serial data output for connection to a computer
- WSR – Wireless receiver with analog output
Depending on the transmitter frequency and environment, the typical wireless range can be several hundred feet to almost a mile. Repeaters are available to extend the range.
For more information, visit the Eltek Product Page on our web site or call us at 800-956-4437. For more information on data logging products from more than a dozen manufacturers go to the CAS Dataloggers Web Site.
We will be exhibiting our advanced data logging equipment from dataTaker, Ibexis and Grant Instruments in Booth 826 at the A&WMA 103rd Annual Conference and Exhibit in Calgary, June 22-25. If you’re there stop by, say hello to Pete and ask him to show you our latest products.
 Delphin 64KTM The Delphin 64KTM was developed to provide a multi-channel solution for temperature measurement using thermocouples. It provides 64 differential inputs with 110V isolation and galvanic separation prevent measurement errors from ground loops and a 24 bit sigma-delta A/D converter. The Cold Junction reference temperature is measured using a class A, 4-wire RTD enabling an absolute accuracy of 0.2°.
Typical users are R&D groups and laboratories who need to acquire highly precise temperature measurements. Traditional areas of use are test stations for gas turbines or boilers but the system is also suitable for temperature measurement in ovens, furnaces, heating chambers, temperature controlled enclosures and manufacturing or processing equipment.
The 64KTM is equipped with internal memory for up to 128 million data records. The memory’s independent data recording capability provides data security for long-term measurement runs. Individual channels can be set up with limit values enabling monitoring and alarm functions and calculations including moving averages. The basis version if the 64KTM is set up for 64 channel operation and the modular design enables several units to be connected so that several thousand channels can be processed.
Other features include:
• Industrial grade 19″ rack enclosure
• Support for E,J,K,L,N,S,R,T,U thermocouples
• 24 Bit measurement resolution
• 1 GB Internal memory
• Ethernet, Modbus, Profibus interfaces
• Up to 1 GB of local memory
• Expandable to >1000 channels
For more information, go to the 64KTM Product Page or call us at 1-800-956-4437. To find out about all of the data logging products we offer including models from more than a dozen manufacturers, visit our web site www.DataLoggerInc.com.
 CAS Dataloggers is pleased to announce the new RTR-500 family of wireless data loggers from TandD Corporation of Japan. These data loggers give you the ability to monitor temperature and humidity virtually anywhere via a built in GSM/GPRS Cellular Modem in the RTR-500GSM base station. The individual loggers communicate with the base station via a high speed short range 900 MHz wireless network. Then, data and alarms are automatically sent from the base station via email or ftp via the standard cell phone network.
The RTR-500 family currently includes:
- RTR-500 USB Base Station/Repeater
- RTR-500GSM Base Station with GSM/GPRS modem
- RTR-501 Temperature Data Logger with internal sensor
- RTR-502 Temperature Data Logger with external sensor
- RTR-503 Temperature and Humidity Data Logger
They offer improved performance over the current RTR-5 series including increased short range wireless range (up to 500 feet), faster download speed and longer battery life, (up to 4 years in the high capacity models).
The new RTR-500GSM Cellular Base Station is the heart of the system. It can automatically download data from up to 20 individual data loggers. The base station also provides real-time monitoring of the data loggers for alarm conditions and can then send the alarm notification via email or SMS. The RTR-500GSM can be powered from an external 8-34 VDC source and features an internal battery backup. It also provides a set of alarm contacts for local notification. An optional GPS can be attached to the RTR-500GSM for location tracking. A new software set-up wizard simplifies the GSM network configuration of the base station.
The RTR-500 family is ideal for monitoring temperature and humidity in locations where LAN connections are not available or practical such as trucks transporting perishable goods, remote storage or warehouse locations and environmental monitoring.
For more information, visit the TandD Product Page, click here for the RTR-500 Brochure, call us at 800-956-4437 or fill out this form:
 L481 DC High Voltage Data Loggers We are pleased to introduce the new Simple Logger® II model L481 DC Voltage Data Logger. It provides an extended voltage measurement range of ±850 VDC with a resolution of 0.1V making is suitable for applications such as monitoring rail voltages, machines, windmills, power supplies and battery packs and for finding intermittent voltage problems.
The L481 can be programmed to sample from 8 times per second to once a day. It can store up to 240,000 measurements in internal non-volatile memory and offers 3 recording modes including Extended Recording Mode (XRM®) for long term data collection. The L481 is battery powered and can operate up to 45 days on 2x AA cells. A simple LED display on the front of the logger provides an immediate indication of logging status and memory usage. Voltage inputs are via standard recessed banana jacks and a set of 5 foot cables with alligator clips are included with the logger.
For set-up and download of data, the L481 logger has a USB 2.0 interface for connection to a standard Windows PC. The free DataView® software included with the unit provides a very simple way to configure the logger, view real-time data, download and plot stored data and generate standard or custom reports. It also allows the measured data to be scaled to custom engineering units and can synchronize multiple loggers to record at the same time.
For more information on the L481 Voltage Data Logger, visit the AEMC Product Page or call us at 800 956-4437. To view a complete selection of data logger for all types of applications, visit our web site, www.DataLoggerInc.com.
|
|
