Request Pricing & Information
LogMessage Data Acquisition Systems
Stand alone operation
LogMessage is a stand alone operating device for acquiring, monitoring, calculating and logging measurement data. It is equipped with a 1GB memory for logging up to
128 million measurement values.
Universal applications
The LogMessage's analog inputs are differentially and
galavanically isolated from each other as well as from the
power supply. Earth loops and non-isolated sensors therefore present no problem. All analog inputs can be used
universally and are capable of measuring any type of thermocouple, RTD, voltage or current signal. Channel configuration takes place via the easy to use DataService
Configurator software included with the delivery.
Various interfaces
Once configured, LogMessage can operate stand alone
and requires no PC support. Configuration and data readout takes place via a network interface. LogMessage's two
serial ports enable connection of a modem for remote
access, or for other hardware to be connected for data
transfer purposes. Alarm notifications and text messages
may also be transmitted using a GSM modem. By operating
the LogMessage device within a network, measurement
data can be transmitted online and processed using the
ProfiSignal Go software.
A complete system including software
LogMessage devices are supplied with the powerful
ProfiSignal Go software. ProfiSignal Go is a professional
PC software for the online and offline monitoring and
analysis of measurement data. If you already use other
measurement technology software, the full service package
includes LabVIEW™ and DASYLab™ drivers, Modbus TCP
and OPC Server.
|
LM100
The LogMessage 100 is equipped with 15 analog inputs
and a sampling rate of up to 600 measurements per
second. The inputs can be used for data acquisition from
mV, mA signals or any type of thermocouple. All inputs
have differential and galvanic isolation.
- 600 Hz sampling rate
- Analog inputs(mV, mA, thermocouple): 15
- Analog inputs(mV, mA, thermocouple, RTD): none
- Analog outputs(mA): none
- Digital inputs(counter): none
- Digital outputs: none
|
|
|
LM200
The LogMessage 200 is equipped with 10 universal analog
inputs, one analog output, 12 digital inputs (11 counters)
and 17 digital outputs. The device has a range of internal
monitoring and control functions that enable it to be used
as a data acquisition device as well as an independently
operating system for control, automation or monitoring.
- 600 Hz sampling rate
- Analog inputs(mV, mA, thermocouple): none
- Analog inputs(mV, mA, thermocouple, RTD): 10
- Analog outputs(mA): 1
- Digital inputs(counter): 12(11)
- Digital outputs: 17
|
|
|
LM300
The LogMessage 300 is equipped with 15 analog inputs
(600 Hz sampling rate) and 24 synchronous digital inputs
(with a time resolution of 1 msec). The device is highly
suited to fault analysis as well as to digital and analog
events.
- 600 Hz sampling rate
- Analog inputs(mV, mA, thermocouple): 15
- Analog inputs(mV, mA, thermocouple, RTD): none
- Analog outputs(mA): none
- Digital inputs(counter): 24
- Digital outputs: 1
|
|
|
LM400
The LogMessage 400 is ideal for monitoring requirements.
Any number of alarm and logic channels can be defined
for the 15 analog inputs. Any of the 24 digital outputs are
directly switchable irrespective of the current alarm situation.
- 600 Hz sampling rate
- Analog inputs(mV, mA, thermocouple): 15
- Analog inputs(mV, mA, thermocouple, RTD): none
- Analog outputs(mA): none
- Digital inputs(counter): 1
- Digital outputs: 24
|
|
|
LM500
The LogMessage 500 is equipped with 16 universal analog
inputs. The inputs are designed to cope with high voltages
between the individual inputs. The LogMessage 500 therefore has no problem in measuring non-isolated signals.
- 120 Hz sampling rate
- Analog inputs(mV, mA, thermocouple): none
- Analog inputs(mV, mA, thermocouple, RTD): 16
- Analog outputs(mA): none
- Digital inputs(counter): none
- Digital outputs: none
|
|
|
LM600
The LogMessage 600 is equipped with 25 analog inputs.
The device can be used for direct data acquisition, monitoring and recording from any thermocouple or RTD sensor
- 1200 Hz sampling rate
- Analog inputs(mV, mA, thermocouple): 15
- Analog inputs(mV, mA, thermocouple, RTD): 10
- Analog outputs(mA): 1
- Digital inputs(counter): none
- Digital outputs: 1
|
|
|
LM700
The LogMessage 700 can acquire measurements from up
to 30 thermocouples. Configuration software is used to
set channels to specific thermocouple types.
- 1200 Hz sampling rate
- Analog inputs(mV, mA, thermocouple): 30
- Analog inputs(mV, mA, thermocouple, RTD): none
- Analog outputs(mA): none
- Digital inputs(counter): none
- Digital outputs: none
|
|
Request Pricing & Information
If you need information right away or prefer to speak with a person, call us and one of our Experienced Applications Engineers will be happy to talk with you. You can reach us at 1-800-956-4437 during our normal business hours Monday - Friday from 8am to 6pm (EDT).
After filling out the form below, an applications engineer will contact you within at least one business day.
* Indicates a required field.
Fields that are not required are recommended to be filled out so that we can better assist you.
