A1-10 Wireless Current Data Logger
Accsense A1-10 Current Input Pod
|
Product Overview
The A1-10 Pod requires a B1-06 Gateway Useful Links
|
Multi-4-20mA Pod
The A1-10 multi-4-20mA Pod is specifically designed to hook up to multiple 4-20mA inputs (6 total). This allows an increase in the number of sensors per pod, and reduces the cost per measurement. This model also features two digital inputs and is designed to be connected to a wide range of digital sensors.
Package Contains:
|
Internal Sensors:
|
External Sensor Inputs:
|
Real-time Monitoring & Alarming
All of the measurements acquired using the Accsense Solution are immediately available on your secure Accsense Account, online. Each gateway requires an online account subscription. Updated in real-time, you can plot measurement history, analyze tabular data, and set alarms to watch your data and provide email, pager, or cell phone alerts. See the Online Account in action by trying out our Live Demo.
Features:
- Simple to use, virtually no learning curve
- Web based, no software installation or firewall configuration hassles
- Customizable interface with dashboard of most recent measurements from all sensor pods
- Instant access to charts depicting measurement history, with ranges as narrow as 5 minutes or as wide as 90 days.
- Manual vertical scaling allows for consistency across multiple graphs and samples.
- Setup alarm states and receive alarms via email, cell phone, pager, or landline. Even send the same alarm to multiple locations!
- View tabular measurement data online
- Download measurement data for offline analysis
- Allow password-protected, limited access to certain users
- Completely secure and backed up at Rackspace™
- FREE software/feature upgrades!
The service exists at three levels. The table below will help you decide which service level is right for you. Remember, you can upgrade your service at anytime.
- Plugs into All Wireless Pods In Place Of AC Adaptor
- Extends Battery Life To 2-3 Years
- Batteries Not Included
- Measures 0-100°C / 3-95% RH, RH ±2.5%
- Temperature Accuracy of ±0.6°C
- 100 Ohm Platinum RTD
- 4-20 mA Output
- Works with A1-10 and requires a external supply
- 0% - 10%
- 0-5V/4-20mA Output
- Accuracy at 25°C ±0.2%
- Includes Remote Sensor, Probe & 6' Cable
- Requires external power
- ±1.5 W.C
- 4-20mA OUTPUT
- Temperature Limits: 18° TO 60 °C
- Accuracy: ±0.25% F.S.
- Screw Type Terminal Block
- Requires external power
- RANGE 0-25%
- 95db Audible Alarm
- 4-20mA Output
- LED Display & Battery Backup
- 2 Oxygen Alarms
- Requires external power
Internal Sensors
| Ambient Temperature Sensor | |
|---|---|
| Temperature Range | -40°C to +70°C |
| Typical Accuracy at 25°C | ±1.4°C |
| Typical Accuracy over Full range | ±2.1% full Span |
| Measurement Resolution | :0.21°C |
| Analog Voltage Inputs | |
|---|---|
| Number of Inputs | 6 |
| Current Range | 0 to 20mA |
| Typical Accuracy | ±0.29% Full Scale |
| Measurement Resolution | 4.883 mV |
| Loop Impedance | 120 |
| Digital Inputs (Contact Closure) | |
|---|---|
| Number of Inputs | 2 |
| Zero Input Voltage | 0 to 0.5Vdc (or Shorted Input) |
| High Input Voltage | 2.4 to 10Vdc (or Open Circuit) |
| Count Range | 216 |
General Specifications
| Physical Size | |
|---|---|
| Dimensions | 3.5 in x 3.25 in x 2in. (89mm x 83mm x 51mm) |
| Weight | 8 oz. (227g) |
| General | |
|---|---|
| Sampling Rate | User Settable 30sec – 24hrs |
| Emergency Data Storage | 250 Samples per Sensor |
| Power Options | |
|---|---|
| Option #1 | 100-240Vac 50-60Hz |
| Option #2 | DC Input 4-7Vdc |
| Option #3 | 3 x AA Batteries (6 month life at 5 minute sampling intervals) |
| Wireless | |
|---|---|
| Range | 250ft Outdoors, 90ft Indoors |
| Topology | Mesh |
| Standard | IEEE 802.15.4 |
| Frequency | 2.4GHz DSS |
| Power Output | -0.79dBm |
| Operating Environment | |
|---|---|
| Operation temperature when using Lithium batteries | -40°C to 70°C, 5-95%rh |
| Operation temperature when using Alkaline batteries | -20°C to 50°C, 5-95%rh |
Request Pricing & Information
If you need information right away or prefer to speak with a person, call us and one of our Experienced Applications Engineers will be happy to talk with you. You can reach us at 1-800-956-4437 during our normal business hours Monday - Friday from 8am to 6pm (EDT).
After filling out the form below, an applications engineer will contact you within at least one business day.
* Indicates a required field.
Fields that are not required are recommended to be filled out so that we can better assist you.
