RTR-500GSM Wireless Data Logger Cellular Base Station
TandD RTR-500GSM Cellular Base Station
|
Product Overview
Description The RTR-500GSM is a Mobile Base Station which can carry out wireless communication and is equipped with GSM phone network capabilities. It can be used as a Base Unit for our newest RTR-500 Wireless Data Logger Series* and if within in communication range for GSM cellular phone service it can be used for transmitting data and warnings from the mountains, on the sea or for any other out of the way places; perfect for tracking data while in transport. When a measurement exceeds an upper or lower limit and has been judged by the RTR-500GSM to qualify as a warning; a warning report can be sent via e-mail or SMS to specified e-mail address enabling the user to always stay in the know about changes in measurement readings. |
GSM Cellular Phone Communication Function
By placing a Base Unit in the truck cabin and Remote Unit(s) in the cargo compartment(s), it is easy to monitor temperature and humidity while on the move. As long as the Base Unit is in communication range for cellular phone service it can be used to communicate with and manage Data Loggers that are within wireless communication range; perfect for during transport, in the mountains, on the sea or for any out of the way places where a LAN connection is impossible.
Warning Monitoring Function
When a measurement exceeds an upper or lower limit and has been judged by the RTR-500GSM to qualify as a warning; a warning report can be sent via E-mail or SMS to specified e-mail address enabling the user to always stay in the know about changes in measurement readings. Moreover, by connecting a siren or lamp to the external contact output connector when an important warning occurs, the people at the point of measurement can also quickly take any necessary action.
Automatic Downloading of Recorded Data and Monitoring of Current Readings
Recorded Data and Current Readings can be automatically downloaded from Remote Unit(s) at a set interval and that data can then be sent by e-mail or FTP to a designated address.
Select a Power Source to meet your Application Needs
The user can select to run the unit on four AA alkaline batteries, or use the AC adaptor to connect to an AC outlet, or hook up to an external power source of their choice by connecting to the External Power Connector (DC 8 – 34V). Keeping batteries in the unit provides a backup source of power for when and if electrical power is cut from the AC or DC connection. If using batteries as the source of power, the estimated battery life is about 10 days.
High Speed Wireless Communication and Data Downloading
The wireless communication range, if unobstructed and direct, is about 150 meters [500 ft]. Downloading recorded data from one full (16,000 readings) Remote Unit into the Base Unit takes only about two minutes. Placing a Repeater between the RTR-500GSM and Remote Units can easily expand the wireless communication range. When using Repeaters and downloading data, the same amount of time noted above is necessary for each Repeater.
About SIM Cards
To use the RTR-500GSM, you first must purchase a SIM card from your cellular phone company or carrier and install it into the RTR-500GSM. After installing the card and making some necessary settings with the supplied software via PC, you are ready to connect to your cellular phone network.
Attach GPS Info to Current Readings (Optional)
Current Readings from Remote Unit(s) can be sent via e-mail or FTP; with a GPS receiver connected current location info can also be attached to the transmission. It is necessary to purchase the GPS receiver separately.
Application Examples
- Place in freight vehicle to record and monitor temperature and humidity during transport
- Monitor and record temperature and humidity in distant places where LAN connection is impossible
Below you will find the list of compatible data loggers that communicate wirelessly with the RTR-500GSM.
- RTR-501 (-40 to 80°C)
- RTR-502 (-60 to 155°C)
- RTR-503 (0 to 55°C, 10 to 95%RH)
- RTR-505-TC (Support for thermocouple sensor types: K, J, T, S)
- RTR-505-Pt (Support for RTD sensor types: Pt100/Pt1000)
- RTR-505-V (Support for Voltage Signals)
- RTR-505-mA (Support for 4-20mA Signals)
- RTR-505-P (Support for Pulse Signals)
T&D WebStorage Service is an online service provided by T&D Corporation. By setting up a RTR-500GSM to transmit recorded data and current readings to T&D's dedicated Internet server, Users can use the WebStorage Service to access and share data anytime from anywhere.
Free Online Service for Data Storage
Experience the convenience of sharing recorded data via the Internet! Perfect for processing and managing data recorded in remote places or for allowing several people to view the same recorded data at their convenience. Recorded data can be transmitted to T&D WebStorage Service from the RTR-500GSM.
The data transmitted to T&D WebStorage Service can be accessed via your browser from anywhere, anytime, as long as an internet connection is available.
Application Examples
One perfect example to show the system's unique power is the "Temperature Management of Products while in Transit".
Here, using RTR-500GSM as an example, T&D WebStorage Service enables the "Sender", the "Receiver", and the "Carrier" to monitor the same current readings graph and check the temperature condition of the products while in transit.
Access your Recorded Data and Current Readings anytime from anywhere and experience the greatness of the new T&D WebStorage Service!
1: GSM Antenna Connector
2: Local Wireless Antenna Connector
3: LED (ERR / POWER / ALM) *1
4: External Contact Output / Input Connector
5: Operation Switch ( STBY / Run ) *2
6: GPS Connector (Mini DIN 6 Pin Female)
7: Antenna
8: Optical Communication Area
9: Battery Cover
10: USB Connector (Mini-B )
11: External Power Connector
12 AC Adaptor Jack
| RTR-500GSM (FCC model / CE model) | |
|---|---|
| Compatible Devices | Remote Units: RTR-501/501L, RTR-502/502L, RTR-503/503L Repeater: RTR-500 |
| Features and Functions | 1. Auto-downloading of Recorded Data (E-mail or FTP) 2. Automatic Sending of Current Readings (E-mail or FTP) 3. Warning Monitoring (SMS, E-mail or Contacts) 4. SMS Remote Control Stop and Start Functions 1, 2, 3, above Request Immediate Download of Data to Set Address |
| Types of Warnings | Remote Unit Temperature / Humidity Measurement Warnings, Remote Unit Wireless Communication Error Warnings, Remote Unit Battery Level Warnings, Remote Unit Sensor Abnormality Warnings, Base Unit External Power Loss Warnings (only when batteries are installed), Base Unit Battery Level Warnings / Base Unit External Contact Input Warnings |
| Power | AA alkaline battery x 4 External power (DC8-34V) AC Adaptor AD-0605 or AD-0607 (5V) |
| Current Consumption | At most 2A (5V, with GSM in operation) |
| Communication Interface | USB (with PC) Optical Communication (with Remote Unit) |
| LED Indicator | POWER: Green / ERR: Orange / ALM: Red |
| Battery Life | 10 days of continued use if monitoring is carried out every 10 minutes (when not using GPS). * Battery life varies depending upon the frequency of communication, the measuring environment, and the quality of the batteries being used. |
| Dimensions | H96mm x W66mm x D39mm / Antenna length 109mm (Excluding protrusions) |
| Weight | Approx. 220g ( including batteries ) |
| Operating Environment | Temperature : 10 to 55 °C ( -10 to 55 °C when external power connected) Humidity : 20 to 80%RH (Without dew condensation) |
| Other | Not waterproof, moistureproof, or dustproof. |
| Short Range Wireless Communication | |
| RF Power | FCC model 7mW / CE model 5mW |
| Wireless Specifications | FCC Part15 Section247 / IC RSS-210 (Frequency Range: 902 to 928MHz) ETSI EN 300 220 (Frequency Range: 869.7 to 870MHz) |
| Transmission Range | About 150 meters (500 ft) (if direct and unobstructed) |
| Communication Speed | When downloading 1 Remote Unit at full logging capacity : About 2 min. * The same amount of time will be necessary for each added Repeater. |
| Cellular Phone Communication | |
| Band | GSM850/GSM1900(PTCRB Certified) GPRS(General Packet Radio Service) GSM900/GSM1800 GPRS(General Packet Radio Service) |
| Data Transfer Protocol | Auto-downloading of Recorded Data / Automatic Sending of Current Readings: FTP (PASV mode also supported) SMTP (SMTP-AUTH, POP-Before) *SMTP-AUTH supports LOGIN only Warning Monitoring: SMS / SMTP (SMTP-AUTH, POP-Before) *SMTP-AUTH supports LOGIN only |
| Contacts (Warning Output/Input) | |
| Output Terminal Open Drain Output |
Voltage when OFF: DC less than 30V Current when ON: less than 0.1A Resistance when ON: 15O |
| Input Terminal | Internal Pull-up : 3V 100kO Maximum Input Voltage : 30V |
| GPS Communication (Option) | |
| GPS Interface | Connector : Mini DIN 6 Pin Female Communication Standard : ANSI / EIA/TIA-232-E Geographic Coordinate System : WSG84 Power Supply : 5V MAX 100mA |
| Other | Attach geographical positioning info to Current Readings |
Software Package
RTR-500 GSM for Windows- RTR-500GSM Settings Utility
- Temperature / Humidity Graph
- Adjustment Tools
"Settings Utility" Program makes Settings a Snap!
The Settings Utility application is used to take care of all Base Unit settings and registration of Remote Units and Repeaters. After having registered and placed the Remote Units and Repeaters in the field, it is possible to run communication tests to check signal strength between the various units to ensure stable communication.
Easy-to-Understand Operation Guide
The Operation Guide that is part of the software uses easy to understand terms to help lead you through all the necessary steps and setting procedures. If during setup you get confused or have trouble, just simply open the Operation Guide in the same on-screen window and make settings while consulting the Guide.
Difficult Cellular Phone Network Settings made Easy
When using the RTR-500GSM, we have included an “Initial Settings Wizard” which guides you through what otherwise would be the difficult process of setting up the unit for GSM network communication; just put in the SIM Card and turn on the Wizard.
Intuitive User-Friendly Graph Tools (Temperature / Humidity Graph and Multi-Scale Graph)
With either program you can view up to eight channels of data in one graph.The Graph programs intuitive operation allows the User to easily hide or view channels, zoom in and out on data, switch back and forth from °C to °F, and view data in table form.
View in Table Form
Graph data can be easily viewed as a data list. The highest and lowest values are shown in easily distinguishable colors.
From Graph Editing to Data Analysis
It is possible to hide, re-order and delete channels, edit recording start times, and make changes to colors used for the graph scale lines, data lines and background. Also move the A and B cursor at the bottom of the graph to view data readings for those points and the calculated difference between the points.By saving graph data as CSV Format Text File data, that data can then be uploaded into common spreadsheet software for data analysis.
Remote Unit Adjustment Settings
When using multiple measuring devices, this function allows the user to correct for inaccuracies found in measured values when compared to a standard measurement (the value measured by the standard device). Measurements can be adjusted and recorded based on a standard measurement. The RTR-500 Series Software allows for adjustment settings to be made to Remote Unit measurements by simply selecting the adjustment method from either "1 Point Adjustment" or "2 Point Adjustment" and entering the values for "Before Adjustment” and "After Adjustment".
AC Adapter (AD-0605)
Input:AC 100V(90-132V)
Output:DC5V 2A
Frequency:50/60Hz
Cable Length:1.85m
Plug Figure: A
AC Adapter (AD-0607)
Input:AC 100-240V(93-264V)
Output:DC5V 2A
Frequency:50/60Hz
Cable Length:1.85m
Plug Figure: C
Wall Attachment
(1) Lock Screw x 2
(2) O-Ring (rubber) x 1
(3) Polyurethane Foam
(4) Aluminum
(5) Double-sided Adhesive tape x 1
Dimension (mm):
W73 x H72 x D43
Screw Holes: 2 - Φ4.2
Request Pricing & Information
If you need information right away or prefer to speak with a person, call us and one of our Experienced Applications Engineers will be happy to talk with you. You can reach us at 1-800-956-4437 during our normal business hours Monday - Friday from 8am to 6pm (EDT).
After filling out the form below, an applications engineer will contact you within at least one business day.
* Indicates a required field.
Fields that are not required are recommended to be filled out so that we can better assist you.
