Chat with us, powered by LiveChat

New Thermistor Data Logger Pushes Data via WiFi

8-Channel Wireless Temperature Recorder

For wireless temperature monitoring applications, Accsense VersaLog introduces the new WF-TH WiFi Thermistor Data Logger. This 8-channel, WiFi-enabled thermistor data logger is battery-powered for standalone operation no matter the setting. Now it’s easier than ever to monitor temperature in real time at multiple points! These WiFi solutions are available now for just $688 from CAS DataLoggers.

VersaLog WF-TH Features:VersaLog WF-TH Wifi Thermistor data logger

  • 16-bit ADC meets most high-resolution requirements
  • 8-MB Internal Memory
  • 8 external thermistor/resistor inputs
  • USB and WiFi (requires external power) interfaces are standard
  • Wide sampling interval selections (1 second to 12 hours)
  • Siteview software required (1 license per site) and sold separately

Record Temperature Data on 8 Channels:

When you need to log temperature data at multiple local points, Accsense VersaLog data loggers are the most cost-effective choice. These compact monitoring solutions commonly feature 7-8 channels with models to log Temperature, Current, Voltage and more. This new line of WiFi data loggers incorporates a standard 802.11 b/g/n interface for wireless network connection when externally powered.

For maximum versatility, every Accense VersaLog model features a built-in USB port for connection to a PC for configuration and data retrieval. Each data logger also has an auxiliary serial port and two programmable alarm outputs which can be configured with low or high limits to activate a relay, audible alarm or signal a PLC.

Portable for Standalone Operation:

VersaLog WiFi data loggerWith the WF-TH wireless data logger, users can connect up to 8 external thermistor sensors, afterward leaving the logger to operate in standalone mode on battery power. The durable aluminum enclosure allows it to record in even the harshest industrial environments.

VersaLog’s 16-bit ADC (analog-to-digital converter) makes it especially useful in lab and science applications to capture precise data. When recording is over, the embedded WiFi module allows remote data monitoring and downloading. Just power the data logger in a WiFi-covered area and then access it from a PC for configuration, downloading, graph viewing and more. Of course, users can choose to retrieve the temperature data via WiFi, Ethernet or USB as desired.

Configuration and Analysis Software:

Siteview software is used to configure the data loggers, retrieve data, graph measurements, and save/export data. SiteView is a Windows-based application (XP, Vista or Windows 7, 8, 10) with an intuitive graphical interface and powerful functionality. Additionally, its versatility of custom equation and custom-line equation can handle complicated measurement requirements.

Using SiteView, operators can also view data in real time from any and all connected data loggers. Further, an alarm management tool allows local or email notification of alarm conditions from any connected logger. SiteView software is sold separately.

For details on the Accsense Versalog WF-TH WiFi Thermistor Data Logger, or for additional help with your application, contact a CAS Data Logger Applications Specialist at (800) 956-4437.