AEMC 1110 Lightmeter

  • Detachable sensor measures 0.1 to 200,000 lux (.01 to 18,580 foot-candles)
  • Spectral error compensation for fluorescent and LED sources
  • Min, max and average statistics
  • Map mode
  • Up to 500 hours battery life
  • Blue luminescent backlit display
  • Bluetooth Low Energy (BLE) and USB interfaces



The AEMC 1110 is a portable, easy-to-use lightmeter that uses a removable light sensor to measure illuminance in lux or foot-candles. User selectable compensation allows accurate measurement of natural, fluorescent or LED light sources. The logger can be used to perform a variety of recording and mapping tasks with easy and intuitive setup from a computer using supplied DataView® software. The ergonomically designed case designed for simple one-hand operation, large blue luminescent backlit display, and intuitive function selection make this instrument the right choice for any application. It offers both USB and Bluetooth Low Energy (BLE) communications interfaces for easy connection to a PC.


0.1 to 999.9 lx0.1 lx
1000 to 9999 lx1.0 lx
10.0 to 99.99 klx10 lx
100 to 200 klx100 lx
.01 to 99.99 fc.01 fc
100 to 999.9 fc0.1 fc
1000 to 9999 fc1 fc
10000 to 18580 fc10 fc
Accuracy±3% of Reading on incandescent sources
±6% of Reading on LED sources, ±4% of reading with compensation
±9% of Reading on fluorescent sources, ±4% of reading with compensation
Memory1,000,000 measurements on each channel (4MB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed.
CommunicationUSB 2.0 and Bluetooth 4.0 BLE range 1m typical
 Power Source3×1.5V AA (LR6) alkaline batteries or USB port (micro-USB adaptor offered as an accessory)
Battery Life500hrs., 3 years when recording with 15 minute intervals
Dimensions:Case: 5.9 x 2.84 x 1.28″ (150 x 72 x 32mm)
Sensor: 6.3 x 3.15 x 1.5″ (160 x 80 x 38mm)
Weight14.1oz (400g) with batteries
Operating Temperature14° to 140° F (-10° to 60°C), 0 to 90% RH
Ingress Protection (IP)IP50