dataTaker CEM20 20 Channel Expansion Module

$1,070

  • Turns 1 analog channel into 20
  • Up to 60 analog inputs per CEM20
  • Compact size
  • Very low power
  • Up to 5 units for DT80 = 100 channels/300 inputs
  • Up to 16 units for DT85 = 320 channels/960 inputs
  • Status LED Indicators

SKU: CEM20 Category:

Description

20 Channel Expansion Module

Increasing the channel capacity of the dataTaker DT8x range is easy by adding the Channel Expansion Module (CEM20). Each CEM20 connects 20 universal data logging channels to the dataTaker data logger. A CEM20 connects to one analog channel of the data logger. The effectively expands the total channel capacity of the DT80 to 320 analog inputs and the DT85 to 960 inputs. Incorporating the same dual isolation technology as the DT8x range of data loggers, each channel of the CEM20 can be used for two isolated inputs or three common reference inputs so the maximum inputs increases further.

Easy Setup and Connection

The CEM20 is powered directly from the data logger 12V input. Analog output connections of the CEM20 connect to an analog channel of the data logger. Analog and control cables for connection to the dataTaker data logger are included.

Specifications

Connections to Logger

  • Digital control connections: 5D & 6D in/out terminals
  • Power connections: 12V & DGND twin terminals
  • Analog connections: *,+,-,#
  • Each CEM20 uses a separate 4 wire analog channel on the logger
  • Maximum distance between logger and last CEM20: 100m
  • Maximum number of CEM20 units per data logger: DT80 & DT80G – 5, DT85 & DT85G – 15

Multiplexer

  • Type: Relay multiplexer
  • Maximum Input Voltage: 30Vdc
  • Maximum Sampling Speed: 12Hz

System

  • Status LED: Sample activity
  • Address selection: 4-way DIP switch. Address 1-15

Power Supply

  • Recommended: logger’s switched 12V output
  • Alternative: external regulated 12Vdc +/-5%
  • Power Consumption Sampling: 0.36W (12V 30mA)
  • Idle: CEM20 automatically turned off when not sampling

Physical and Environment

  • Construction: powder coated steel and anodized aluminum
  • Dimensions: 180 x 100 x 50mm
  • Weight: 0.55kg
  • Temperature Range: -45°C to 70°C
  • Humidity: 85% RH, non-condensing

Accessories Included

  • Analog and control cables for connection to the dataTaker data logger