DCVC-HR Voltage Current Data Logger

  • 16-bit analog-to-digital converter
  • 4 MB Memory stores up to 2 million measurements
  • Seven range programmable voltage and current external input channels
  • Can be accessed via USB, MODEM, or Ethernet connections
  • 10-year battery life
  • Fast sampling mode
  • Alarm and excitation output
  • Siteview software required (1 license per site) and sold separately

$638.00

Additional Equipment Required

Description

The VersaLog DCVC-HR is an 8-channel, battery powered, stand alone voltage/current DC data logger. It records up to 4 mega bytes of data and stores it in non-volatile flash memory for later retrieval. Input voltage/current signals can be from sensors, transducers, transmitters or any other common voltage/current sources.

Featuring an aluminum enclosure and conformal coating PCB, the logger has excellent performance in the harshest industrial environment.

Powered by a 16-bit ADC and programmable input range, the logger is well suited to science and laboratory applications where precise and accurate measurement is critical.

Siteview software required (1 license per site) and sold separately

Memory Capacity


All VersaLog data loggers come with 4MB on-board flash memory. The following table shows the relationship between number of enabled channels, sampling interval and max time span of logging.

Sampling IntervalNumber of ChannelsLogging Capacity
1 min13.98 years
1 min2727 days
1 min8181 days
10 sec1242 days
10 sec2121 days
10 sec830 days
1 sec124 days
1 sec212 days
1 sec83 days
100 milliseconds158 hours
100 milliseconds229 hours
100 milliseconds87.2 hours

Specifications

Inputs
ChannelsCH1 ~ CH4 (voltage): programmable range for each: 0 ~ 20 V,
0 ~ 2 V, CH5 ~ CH7 (current) programmable range for each:
0 ~ 20 mA
AccuracyThermistor channel: reference temperature 0.36°F

Voltage channels: +/- 0.05% FSR @ 25°C for 20V channels,
+/- 0.1% FSR @ 25°C for 2V channels
Current channels: +/- 0.15% FSR @ 25°C

Load ResistorFor current channel: 12 Ohms
ProtectionVoltage channel: +/- 40 VDC, Current channel: +/-100 mA
Alarms
Channel AlarmsTwo editable alarm thresholds per channel
Alarm OutputsALARM1 & A2/EXT terminal strips can be configured
as alarm outputsAlarm-On: MOSFET (N-Channel) switch on
Alarm-Off: MOSFET (N-Channel) switch offMax Power: 200mA @ 24VDC
Alarm-On DelayProgrammable 0 – 10 minutes delay with 1-minute increments
Alarm IndicatorOn-board LED lights in red when in alarm condition
On-Board Memory
Capacity4MB ~ 2 million measurements
Data RetentionOver 20 years
Sampling & Logging
Sampling interval20 milliseconds[1] to 12 hours user selectable
Logging ModeStop recording or FIFO when memory is full
Logging ActivationProgrammable instant, start delay or field push-button activation
Communications
InterfaceUSB (USB cable included), AUX (RJ11) for direct TTL level
communications
Baud RateAuto-detect baud rate from 2400 to 115200 bps on both USB and AUX
ports
Battery
PowerBuilt-in 3.6V Lithium Battery
Life Cycle10 years based on 1 minute sampling interval
Software
SiteViewConfiguration, downloading, plotting, real-time view, custom calibration
and custom equation
RequirementsComputer with 1.0 GHz or faster processor, 256 MB Memory
or higher & 1.0 GB of available hard-drive space or higher
Windows XP with SP2 or later, Vista, Windows 7, 8
At least one USB port or one COM port
Physical
MaterialAluminum enclosure
Dimensions88 X 64.2 X 24 mm (3.46 X 2.53 X 0.95 inches)
Weight200g
MountingProbe/wall mount holes for hanging / mounting
Other
LED IndicatorNormal Sampling: green when sampling
Alarm: red when sampling
Low Battery: amber when sampling
Exitation ControlA2/EXT terminal strip can be configured as excitation control output for
powering connected devices
Warm-up delay Interval settings: 10 to 240 seconds with 10-second
increments
Operating Environment-40 ~ +70°C (-40°F ~ 158°F), 0~95%RH non-condensing
Clock Accuracy+/- 1 minute per month
ApprovalsCE, FCC

Software

Siteview Software

VersaLog SiteView Software

SiteView is a Windows-based application which works with the VersaLog Series data loggers for downloading, configuration, data analyzing and plotting. Its user-friendly graphic interface plus powerful functionality fit both novice and advanced users.

The versatility of custom equation and custom-line equation handle complicated measurement requirements.

  • Supports USB, Serial port and Ethernet connections for easy local and remote access
  • Fast communication speed up to 115200 bps makes downloading fast
  • Real-time view and chart recording replaces chart recording device
  • Custom equation and custom-line equation solves scientific and laboratory algorithm difficulties
  • Zoom in/zoom out, annotation/label of graph functions provide detailed view of data
  • Multiple file loading allows easy data comparison.
  • Dynamic statistics provides detailed information of current zoomed view
  • Siteview software required (1 license per site) and sold separately

Software Requirements:

  • Computer with 1.0 GHz or faster processor
  • 256K Memory or higher
  • 1.0 GB of available hard-drive space or higher
  • Windows XP with SP2 or later, Vista, Windows 7 and 8
  • At least one USB port or one COM port

Accessories