Lascar EL-WiFi-Alert Audible and Visual Alarm

$191

  • Only works with EL-WiFi range of sensors
  • Detects alarm triggers and sends audible alarm and flashes red LED lights
  • Wirelessly connect to multiple EL-WiFi sensors via WiFi
  • Configurable alert tones and volume
  • Signal strength indicator
  • Operating temperature -20 to +50°C (-4 to +140°F)
  • 802.11b compliant, IP65 rating
  • Rechargeable internal lithium battery
SKU: EL-WIFI-ALERT Categories: , , , ,

Description

The Lascar EL-WiFi-Alert is a standalone monitoring system for all sensor devices in the EasyLog WiFi range. The EL-WiFi-Alert will receive alarm messages from any EL-WiFi sensor device connected to the same wireless network. The EL-WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of nine alarm tones. The EL-WiFi-Alert continues to work when the PC is turned off.

The EL-WiFi-Alert has been designed to be continuously powered via the mains and it is supplied with a choice of UK, EU or US power adaptor. However it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.

The WiFi signal strength indicator is activated by pressing the EL-WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.

The audible alarm can be muted by pressing the EL-WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.

Set-up is completed through software installed on the PC. This software is available to download for free from www.lascarelectronics.com. Free firmware downloads are also available from the same web page.

After initial set-up audible and visual alerts can be re-configured wirelessly using the PC software.

The EL-WiFi-Alert can be attached to a wall or flat surface using the bracket provided, and has a protection rating of IP44 (with cable connected).

This device is IEEE 802.11b compliant, supports WEP, WPA/WPA2 and WPA-Enterprise (MS-CHAPv2, PEAP, EAP-FAST, EAP-TTLS)

Specifications

Specification Min. Typ. Max. Unit
USB supply voltage 4.5 5 5.5 Vd.c.
Sound output 100 dBA at 1m
Operating temperature range 0 (+32) +40 (+104) °C (°F)

Warning – do not exceed operating temperatures

Accessories