Delphin Expert Vibro Data Acquisition and Control System – 16 Channels


This item requires configuration. Request Configuration & PricingRequest a Demo
  • 16 synchronous analog inputs, 50 kHz sampling rate per channel, IEPE, mV, mA sensors selectable via software
  • Dual-core FPGA processor based on ARM technology
  • Built-in FFT signal processing for characteristic values
  • Integrated comparators for Keyphasor® sensors
  • 32 GB data logger memory
  • 4 digital inputs for frequency measurement
  • 4 analog outputs for monitoring
  • 8 digital outputs
  • Software required and sold separately


Additional Equipment Required

  • Delphin ProfiSignal Go Software - $1365 | Add to cart
  • Delphin ProfiSignal Basic for up to 40 Channels - $1925 | Add to cart
  • Delphin ProfiSignal Klicks for up to 40 Channels - $2510 | Add to cart


Expert Vibro Data Acquisition System

With its Expert Vibro device, Delphin has successfully combined the processing of complex functions with high levels of flexibility in a user-friendly system. Vibration measurement systems can now be used where they had previously been economically infeasible. The device is equipped with a high powered, dual core FPGA processor based on ARM technology giving users ample reserves of processing power.

Users are able to switch between voltage measurement, IEPE or shaft vibration sensors. Integrated comparators and digital inputs allow flexible triggering. Measurement data is monitored “on the fly” with digital outputs being switched within msecs in the event of limit value violations .

Vibrations deliver information on the condition of bearings, shafts and machinery and generally have a major affect on levels of quality in production processes. They should therefore be continuously acquired, intelligently evaluated and condensed into meaningful data for monitoring. In critical situations, machinery needs to be shut down within milliseconds.

Expert Vibro combines the requirements and functioning of modern vibration measurement systems into a highly compact device. Other systems usually require multiple equipment. Vibration measurement is made easy with Expert Vibro. System installation and familiarization are short so that users can quickly start processing their data.

Expert Vibro provides users with  analysis and monitoring functions, intelligent signal processing, an independent data storage capability and versatile fieldbus connections – all in a single device. Right from the outset, users save costs and avoid troublesome interface problems.

Of special benefit is the modular system for signal processing with a range of preprocessing functions. Filters, such as high, low, or bandpass with rectifiers, integrators, differentiators or decimators can be selected to make up a preprocessing sequence. Multiple preprocessing sequences are able to run in parallel in order to evaluate an input signal. This gives users an especially high level of flexibility.

Non-periodic signals, such as in fault diagnostics, can be analysed precisely using Expert Vibro. In continuous sampling mode, even the smallest of irregularities are recorded. Expert Vibro measures, monitors and records fully independently. Expert Vibro is equipped with its own internal data storage capability making it especially reliable and secure.



Inputs / Outputs
Analog inputs 16
Sampling rate, adjustable per channel 1 Hz … 50,000 Hz
Voltage / current range ± 25 V / 0 … 20 mA, 4 … 20 mA, free
Signal conditioning, switchable via software-selectable No, AC coupling, IEPE
Resolution / input impedance 24 Bit / 1 MO
Dielectric withstand voltage / galvanic isolation
Channel to channel
± 100 VDC / ±500 VDC
Usable signal bandwidth DC … 20 kHz
Digital frequency inputs 4
Input signal low: 0 … 2 V / high: 5 … 50 VDC@3,5 mA / galvanically isolated
Frequency inputs measurement range 0,2 Hz … 1 MHz
Analog outputs 4
Resolution 16 Bit
Output range 0 … 10 V / ± 10 V / 0 … 20 mA / 4 … 20 mA / galvanically isolated
Maximum load resistance 500 O
Digital outputs 8
Switching voltage / current / PWM 50 V / 0,6 A / galvanically isolated / 5 Hz … 10 KHz, to 1:500
Data storage
Maximum size / measurement values 32 GB / … 1 billion measurement values
Signal processing functions
High-pass filter
Cutoff frequency / filter ordering / filter characteristic 0,5 … 20,000 Hz / 4, 6, 8, 10 / Bessel, among others
Low-pass filter
Cutoff frequency / filter ordering / filter characteristic 0,5 … 20,000 Hz / 4, 6, 8, 10 / Bessel, among others
Integrator / differentiator
Single or double-integrator / differentiator
Line number / window / communication max. 12,800 Linien / Hanning, Flattop … / 2 … 32 times
Types of FFT narrow / wide band, envelope / demodulation, amplitude-phase spectra
Characteristic values from time signal
Maximum / minimum value, peak-to-peak value, arithm. mean, true RMS, max of vect. Sum, arithm. mean of the product
Characteristic values from frequency spectra
Frequency, main phase and any harmonic amplitude, frequency, total value, square root means (in any frequency bands), total value, residual value
LAN 2 x 1000Base-TX
Wi-Fi / WWAN 802.11b/g/n / GPRS, UMTS, LTE
USB Device 2.0 / Host 2.0
PROFIBUS 2 x PROFIBUS DPV1 / Slave max. 12 Mbit
CAN / RS 232/485 2 x CAN 2.0 / Modbus RTU, SCPI, ASCII
General technical information
Dimensions / weight 210 mm x 80 mm x 125 mm / 750 g
Fixing Support rail DIN EN 50023 or screw fixing, pluable screw terminals, 96 terminals in 2 rows
Signal connections max. 1,5 mm²
Temperature range -20 … 60° C
Supply voltage / power consumption 12 … 24 / ± 10% / ca. 10 Watts


ProfiSignal Software

The configuration of ProfiMessage is done with the included software “Data Service Configurator/Device Configurator”. The representation of the channels is clear and intuitive operation , similar to Windows Explorer. Double-click on a channel will open a configuration dialog in which all channel properties can be adjusted. The individual configuration files are stored in XML format in the ProfiMessage equipment and can be alternatively edited with an XML editor offline.

All measured values can be transferred online stores and will work on PCs or servers. The visualization or analysis is done with the ProfiSignal software dolphin or OPC Server with any software. This provides the ProfiSignal software in combination with a conventional device TopMessage up to 1000 times higher time resolution than a SCADA system.

In addition ProfiSignal as universal software for data acquisition, test automation and data acquisition applications. The range of application ranging from simple data storage and visualization to a complete automation solution with reporting.

Go with the three different versions, Basic and clicks ProfiSignal is suitable scalable.

ProfiSignal Go – Software for data acquisition
ProfiSignal Basic – software for process visualization and monitoring
ProfiSignal Klicks – software for the automation of process and measurement procedures

ProfiMessage Software Channels

Monitoring and automation tasks can be realised using ProfiMessage software channels. Software channels are pre-defined function modules that users can generate and configure per mouse click and then subsequently run within the device. All functions are performed autonomously by the powerful internal processor. This guarantees full operational security for the ProfiMessage device.


Fieldbus and PC Interfaces

Expert Vibro InterfacesExpert Vibro can be connected to a network via a LAN interface or to a PC via a USB connection. For field bus connections, the device has two PROFIBUS DP Slave interfaces, a Modbus TCP and a Modbus RTU, and a user-configurable CAN interface.

The interfaces can alternatively be used to connect any other measurement equipment and sensors via RS232/485 ports. ExpertVib is integrated into PROFIBUS via a GSD file. An option is available to switch operating mode to redundant (according to PNO 2.212 V1.2) PROFIBUS. The LAN and RS485 interface can also exchange data via the Modbus TCP/RTU protocol.

Expert Vibro supports this operation as a Modbus master or slave. The LAN interface transmits all data from measurements and software channels online and at high speed across the intranet or internet. Any networked PC can access the device via this interface. To measure vibrations from multiple channels, multiple Expert Vibro devices can be synchronized with each other.

Expert Vibro Screens