Brainchild IO-16DO Module

  • 16 Digital Outputs
  • DIN Rail Mounting Clip
  • Modbus RS485  and Modbus TCP models
  • Simple setup and easy handing
  • Communicate with a datalogger, PLC or HMI via Modbus protocol
  • LED for each module IO status, communication and power supply
  • Removable screw terminal connectors

$180.00$240.00

Description

The IO-16DO Digital Output Module by Brainchild with RS485 interface that provides 16 isolated digital outputs. For use with HMI, PLC or SCADA via Modbus protocol.

Each channel has a connection terminals and an LED status indicator channel. Uses the Brainchild PC software IO Studio to configure communication with the module. The module housing is plastic with DIN rail mounting.

Specifications

  • Digital outputs: 16
  • Isolation of entries: 1500 Vrms
  • Counter resolution: 32 bit
  • Frequency meter: 1 kHz
  • Width of each pulse: minimum of 500 ms
  • Counter mode: up and down
  • Digital input level 0: +0 VDC +6.5 VDC
  • Level 1 Digital input: +12 VDC to +24 VDC
  • Input Impedance: 2200 Ohms
  • Input filter: 6553 s maximum
  • 2 Models with serial or Ethernet Communication interface
    1. Modbus RTU via RS-485 Serial 2-wire protocol  allows up to 128 connected to the same RS485 network, baud rate: up to 115200 bps
    2. Modbus TCP via Ethernet 10/100 MBPS interface
  • Designed for use with HMI, PLC, SCADA and compatible with Modbus RTU or Modbus TCP protocol depending on model
  • LED status indicator for each channel
  • Power supply (not included): +12 VDC to +24 VDC
  • Watchdog timer
  • Watchdog time adjustable from 1 to 255 s
  • Mounted in plastic housing easily portable and compatible with the system DIN-rail mounting
  • Provides automatic connection to terminal block power and data
  • Module Size: 23 x 109 x 98 mm
  • Weight: 105 g