Voltage Data Loggers
Large selection of AC & DC voltage data loggers to choose from for any application. Monitor, analyze and record data. For sources ranging from batteries, solar panels and power supplies to power line voltage.
Read More…
There are two types of voltage data loggers: those that measure DC voltage from sources like batteries, solar panels or DC power supplies and AC voltage data loggers that measure power line voltages. Once you have determined whether you need to measure DC or AC voltage, the next most important factor in selecting a logger is knowing the voltage range to be measured.
In the case of DC Voltage Loggers, typical measurement ranges are low level signals in the millivolt (mV) range which may be output directly by some sensors, voltages in the 0-1 or 0-10 volt range which are output by pressure sensors or individual battery cells, 0-100 volts which is typically found in smaller solar panels or multi-cell battery packs and finally 100+ volt ranges which are found in large solar arrays, large battery packs or high power systems.
For AC Voltage measurements, there are several families of data loggers that directly accept AC voltages up to 1000 VAC. Single-phase models where there is only one voltage input and three phase models that are suitable for industrial/commercial power measurements are available.
Lastly, some applications require a mix of both DC and AC voltage measurements or a combination of voltage measurements along with other measurements such as temperature, pressure, current, etc. Universal Input Data Loggers are ideal for these kinds of projects. A complete package including the logger and transducers can be provided to enable almost any mix of signal input types.
Transducer Support
If you need to measure voltages that are beyond the standard input ranges of these data loggers, transducers can be provided that are suitable for up to hundreds or thousands of volts and will work with general purpose data loggers that allow measurement of most voltages and currents found in residential, commercial or industrial applications. These loggers also allow the measurement of other input signals types besides voltage and current.
Read Less…
Showing all 28 results
-
TandD MCR-4V
4 DC Voltage Channels: ±300 mV, ±1.5 V, ±6 V, ±24 V, LCD Display. $367.00 -
Novus LogBox Wi-Fi
3 Universal Analog Inputs, WiFi and USB Interface. $388.00 -
Electrocorder EC-7VAR
3 Phase AC Voltage, Current, Power and Energy up to 600Vac and 3kAac. $1,995.00 -
Novus LogBox BLE
3 Universal Analog Inputs, Bluetooth and USB $353.00 -
VersaLog VL-DCV-2
7 Voltage Input Channels, 1 Internal Thermistor Channel. $618.00 -
AEMC PEL 103
Single, Split, & Three Phase Power Logger with 6 Inputs & LCD Display. $2,495.00 -
AEMC SL13
1 Channel, ±50VDC Input, Battery-Powered, USB Interface -
Electrocorder EC-3V
3 Phase AC Voltage Up to 600Vac with Phase Rotation Checker. $1,045.00 -
Electrocorder DC-3VA
2 DC Voltage Channels Up to 300Vdc, 1 Current Channel up to 100Adc. $1,999.00 -
Electrocorder EC-1V
Single Phase, Waterproof, AC Voltage up to 300Vac with Plug. $610.00 -
VersaLog VL-WF-V
8 Voltage Input Channels, Battery-Powered, WiFi Interface. $738.00 -
AEMC SL12
1 Channel, ±10VDC Input, Battery-Powered, USB Interface -
AEMC L452
2 Channels DC Voltage & Current, Real-Time Display, User Selectable Ranges. -
AEMC L261 TRMS AC Voltage Data Logger
Single channel AC/DC voltage input range from 0 to 600VAC/DAC. -
Electrocorder PV-3
DC Voltage Up to 300Vdc & Current Up to 100Adc Plus Solar Irradiance. $2,775.00 -
Novus LogBox LTE
2 Universal Analog Inputs, 1 Digital Input, 1 Digital Output, MQTT Protocol $388.00 -
AEMC SL10
1 Channel, ±100mV DC Input, Battery-Powered, USB Interface -
Novus DigiRail-VA
AC Power Analysis, Compact DIN Rail Mounting Unit with RS485/Modbus RTU. $197.00 -
AEMC PEL 105
Waterproof, Single, Split, & 3 Phase with 5 Voltage & 4 Current Channels. $4,090.00 – $5,245.00 -
AEMC PEL 102
Single, Split, & Three Phase Power Logger with 6 Inputs without Display. $2,265.00 -
AEMC SL11
1 Channel, ±1.0VDC Input, Battery-Powered, USB Interface -
AEMC SL01
1 Channel, 0-5 VAC Input, Battery-Powered, USB Interface -
TandD RTR-505B-V
Instantaneous or Average Recording of 0-22 Volts, Wireless Interface. $218.00 – $303.00 -
dataTaker DT90L
8 Analog and 3 Digital Inputs, SDI-12, Modbus & Built-in Cellular Modem -
Infinite ADS-260
Wireless Sigfox End Node with1 Analog Input, SDI-12 and Modbus Sensor Support $500.00 -
Eltek GS-44
4 Voltage/Current Inputs 0-10VDC/4-20mA, Wireless Interface. $828.00 -
AEMC Powerpad III 8333
3 Phase Power Quality Analyzer, 4 Voltage & 3 Current Input Terminals. -
AEMC Powerpad III 8336
3 Phase Power Quality Analyzer, 5 Voltage & 4 Current Input Terminals.