• Simple to use, single-, dual- (split-phase) and three-phase (Y, ∆) power & energy loggers
  • Provides all the necessary functions for Power and Energy data logging for 50Hz, 60Hz, 400Hz and DC distribution systems
  • Current measurements from 100mA up to10,000A using flexible current sensors
  • Automatic recognition of the connected current sensors/probes
  • Power measurements: VA, W and var
  • Energy measurements VAh, Wh (source/load indication) and varh (including quadrant indication)
  • Record cost of energy usage
  • Power Factor (PF), Cos (ϕ), Tan (Φ) and DPF
  • Total Harmonic Distortion (THD) for voltagesand currents
  • Harmonics up to the 50th order for 50/60Hzvoltages and currents and 7th order for 400Hz
  • Simultaneous RMS measurements of each phase @ 128 samples/cycle and DC
  • Storage of measured and calculated valueson a SD-Card or SDHC-Card
  • Configuration of current and voltage ratiosto external PT and CT ratios
  • USB, LAN, and Bluetooth communication
  • Includes DataView® software for data storage, real-time display, analysis and report generation with supplied pre-defined or custom templates



The AEMC PEL 102 Power Energy Data Logger is a low cost, simple to use, one, two (split phase) and three-phase (Y, ∆) power and energy data logger (no display).

This product is ideal for electricians, engineers and contractors doing work in the area of building and system monitoring and upgrades, as well as residential and overall energy audits. All vital energy data is easily measured, recorded and analyzed. Reports can be generated with confidence and with minimal configuration time and effort.

The PEL 102 comes standard with:

  • Small tool bag
  • Three MiniFlex sensors
  • 5 ft. USB cable
  • 4 black test leads and alligator clips
  • Power cord
  • 12 Color-coded ID markers
  • Multiflex mounting systems
  • Safety card for the PEL
  • Sensor compliance sheet
  • 2 GB SD-card with reader
  • Quick start user guide
  • USB stick with DataView manual





General specifications
DisplayWithoutTriple digital display
Installation typesSingle-phase, split-phase, three-phase with or without
neutral and many other specific configurations
Accuracy class0.2%
Electrical specifications
Number of channels3 voltage inputs / 3 current inputs (calculation of neutral current)
Network frequency
DC, 50 Hz, 60 Hz and 400 Hz
Voltage range0 to 1,000 V AC and DC
Current range
A193 and MA193
2 to 240 AAC
0.005 AAC to 5 AAC / 0.1 AAC to 120 AAC
3 A to 1,200 AAC
100 mA to 10,000 AAC
10 A to 1,000 AAC / 10 A to 1,400 ADC
150 mA to 10 AAC/DC – 100 mA to 100 AAC/DC
Voltage ratio/
Current ratio
Up to 650,000 V / up to 25,000 A
Calculated measurements
Power10 W to 10 GW / 10 var to 10 Gvar / 10 VA to 10 GVA
EnergyUp to 4EWh / 4 EVAh / 4 Evarh
Phasecos φ, tan Φ, PF
HarmonicsUp to the 50th order
Complementary functions
Phase order
Min / Max:Yes
MountingMagnet, hook

Sampling / Acquisition rate / Aggregation
28 samples/period – 1 measurement per second
from 1 min to 60 min
MemorySD card, 2 GB (SD-HC up to 32 GB)
CommunicationBluetooth (Class 2), Ethernet, USB
Power supply
110 V – 250 V (+ 10%, – 15 %) @ 50-60 Hz & 400Hz
SafetyIEC 61010 CAT IV 600 V and CAT III 1,000 V
Mechanical specifications
Dimensions256 x 125 x 37 mm without sensor
Weight900 g950 g
CasingIP54, UL (pending)

Dataview Software

Data Analysis and Reporting Software for Data Loggers

Configure all data logger functions

Display and analyze real-time data on your PC
Configure all data logger functions and parameters from your PC including sample rate, recording length, channel configuration and more
Create and store a complete library of configurations that can be uploaded to the logger as needed
Zoom in and out and pan through sections of the graph to analyze the data
Download, display and analyze recorded data
Display waveforms, trend graphs, harmonics (AC models) and text summaries
Create custom views and reports
Print reports using standard or custom templates you design