RTR-500DC Wireless Data Logger Handheld Data Collector

$317$352

  • Stores up to 15 units of data from the RTR-501/502/503/505
  • Stores up to 7 units of data from the RTR-574
  • LCD Display
  • Multiple functions: Manage, monitor, start / stop and graph data
  • Wireless & non-wireless communication
  • Range: 500 ft

Clear
SKU: RTR-500DC Categories: , , ,

Description

Wireless Communication Data Collector

The TandD RTR-500DC can collect recorded data from Remote Units via wireless communication. The wireless communication range, if unobstructed and direct, is about 150 meters (500 ft). By setting up RTR-500 unit(s) as Repeater(s), it is possible to extend the wireless communication range.

On-site Graph Display

The data collected to the RTR-500DC can be immediately viewed in graph form on the spot without the need for a computer. A graph is displayed for each channel of data. It is possible to view, for example, four channels of data measured and recorded by the RTR-574 by pressing the Operation Dial to switch the channel for viewing. A simple yet functional graph of the RTR-500DC enables you to check the judgement result weather the set Upper/Lower Limit has been exceeded or not, check the highest and lowest readings, as well as zoom in and out.

Monitoring for Warning and Current Readings

Using the monitoring function, the RTR-500DC carries out wireless communication at a set interval with the registered Data Loggers (Remote Units) to monitor Current Readings and Remote Unit Status. The RTR-500DC also monitors for warnings in Data Loggers for which the Upper / Lower Limit settings have been made via the supplied software.

Managing Remote Units in Groups with One RTR-500DC Unit

An RTR-500DC can manage a large number of Remote Units. When registering multiple Remote Units, they can be divided into Groups by location or measurement item, each of which can then be assigned a communication frequency channel. The maximum number of Groups which can be registered in one RTR-500DC Unit is 7 (seven). Within each group the maximum number of Remote Units which can be registered is 32 (If using RTR-574 the max is 16).

Operating Same Remote Units via Multiple RTR-500DC Units

Multiple RTR-500DC Units can be used to communicate with one Remote Unit. It is possible, for example, to use one RTR-500DC Unit to monitor the Current Readings and another to collect data, or to have a number of workers carry one each. It is easy to prepare the number of RTR-500DC necessary for the job. After having registered a Remote Unit its registration info can then be sent to multiple RTR-500DC (Base Units), either by using the software “RTR-500DC for Windows” and copying the Base Unit registration info into a multiple number of Base Units, or by using the “Visitor Entry” function by having the Base Unit read the Remote Unit info directly without using the software.

Ready for Use Without Troublesome Preparation

The RTR-500DC does not need troublesome preparation such as creating a network environment or carrying out wiring. All you need is a PC and accessories to use an RTR-500DC. By using the supplied software, you can carry out registrations and settings for Data Loggers to use with the RTR-500DC Unit, as well as the Unit operations such as downloading of the collected data to a PC, saving, and graph display.

Easy One-Hand Operation

The handy Operation Dial makes the operation of the RTR-500DC simple; moving the dial up and down displays the various menu selections which can be easily selected by pressing in on the dial. Easy-to-read LCD and simple menu structure enables a quick intuitive operation on site.

Various Power Supplies and Energy Saving Function

Power is provided by two AAA alkaline batteries. It is also possible to supply power to the RTR-500DC Unit from AAA Ni-MH batteries, USB bus power, or AC adaptor (optional). The energy saving function will automatically turn off the Unit to save battery power if the Unit is not used for about three minutes.

LCD Backlight Display for Reading in the Dark

The RTR-500DC has a LCD backlight display to help you read data even in the dark. If the Unit is not used for more than five seconds, the LCD backlight will automatically turn OFF to save battery power. Once operation is re-started, it will automatically turn back ON. When the Unit is connected to an AC adaptor, the backlight remains ON.

Easy Firmware Update

The latest information and programs for the Unit, such as firmware updates, are available from the Support Page of our T&D Website. You can update the RTR-500DC firmware on your own to support the changes of the compatible devices as new models are released, for example.

Application Examples

  • For downloading recorded data and monitoring current readings for moving or rotating Remote Unit(s) on production lines.
  • For downloading recorded data and monitoring current readings for Remote Unit(s) in cargo compartment(s) using a Base Unit in the truck cabin.

 

View the RTR-500 Product Brochure (PDF) or the RTR-500 Overview Video.